Customer Service:

(800) 421-5830
customerservice@mkdiamond.com


MK Twitter Link
SRX-150 Green Cut Early Entry Saw

Compact and lightweight, the SRX-150 dry cutting saw is engineered for early entry sawing of crack control joints within one to two hours of concrete finishing. The blade guard features a vacuum port to control dust when dry cutting. One-year limited warranty.


  • "Upcut" blade rotation facilitates keeping debris out of the joint
  • Triangular shaped arbor
  • Blade shaft with self-aligning bearings
  • Vacuum port for easy connection to dust control systems
  • Remotely mounted throttle and stop switch for quick operator access
  • Folding handle bar for compact transport and storage
  • Poly V-belt for positive power transmission
  • Easily removed blade guard cover provides quick access for blade changes and inspection
  • 3-inch wide, polyurethane wheels for non-marking
  • Anti-spall, quick change skid plate
  • Lifting point for easy transport
Part# 172023-H
Engine Honda GX160 Cyclone
Blade Capacity 6-3/8" (162 mm)
Depth of Cut 1-1/8" (29 mm)
Arbor Triangular
LxWxH (inches) 32" x 19" x 42"
LxWxH mm) 813 x 483 x 1,067
Weight 88 lbs. (39.9 kg)
Blade not included with saw.

* Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. MK Diamond Products makes no claim, representation or warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy or the engine power rating. Users are advised to consult the engine manufacturer’s owners manual and website for specific information regarding the engine power rating.

Warning: This equipment contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. These chemicals are contained in various components. fluids and paint including but not limited to fuel, oil, electric motors and batteries. In addition, gasoline/diesel powered equipment emits engine exhaust and fumes, and when serviced, cleaned or maintained generate used oil, waste fluids, fumes, grease, grime and particulates from the component wear and silica dust which contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Click on thumbnails for enlarged images.
Accessories Included with SRX-150
Skid Plate

Recommended Blades
Ultra Hard Aggregate CG-10

Hard Aggregate CG-20

Medium/Hard Aggregate CG-30

Medium Aggregate CG-35

Medium/Soft Aggregate CG-55