Cab Combo Six-Inch Carbide Workshop
This 6" combination polisher/trim saw/grinder has three stainless steel valves that provide independent water flow to both grinding wheels and the expandable drum. A submersible water pump provides cooling water recirculation. The one-piece cast aluminum tank and base has sealed bearings mounted to a 5/8" stainless steel shaft. The end-polishing disc is ideal for final polish and buff . Trim saw has a removable table top and tank drain plug for ease of oil/sludge removal.
Six-Inch Carbide Cab Combo Workshop
- 1/3 hp thermal protected 1,725 RPM motor
- 100 & 200 grit 6" x 1" carbide wheels
- 400, 600, 1,200 & 3,000 mesh resin-bond diamond belts
- 6" x 1-1/2" rubber expandable drum
- Three Polytex polishing pads
- 6" convex polishing hub
- 6" leather polishing disc
- 3M™ feathering disc adhesive
- 8 oz. bottle of Tool-Cool
- 8,000, 14,000 & 50,000 grit diamond paste syringes
- Submersible electric water pump
- Three stainless steel water control valves
- Dressing T-bar
- 6" x .020 x 5/8" 303C diamond blade
- GFCI & power switch
- Baseboard & adjustable motor mount
Six-Inch Carbide Cab Combo Workshop
Part # 8300011
| Part # | 8300011 |
| Motor | 1/3 HP |
| RPM | 1,725 |
| LxWxH | 22-1/2" x 28" x 11" |
| Weight | 110 lbs. |
Optional Accessories
