Customer Service:

(800) 421-5830
customerservice@mkdiamond.com


MK Twitter Link
Scarifier Drum Parts
Scarifier Drum Parts
Cutting Wheels and Parts Part #
Carbide 5 Point 158492
Carbide 6 Point 158493
18 Point Steel Sharp Tooth 158494
12 Point Steel Blunt Tooth 158495
Hardened Steel Spacer 158575
Hardened Steel Shaft 158463

Five Tooth Carbide Tip Star

  • Used for grinding, leveling, grooving, cleaning, and preparing concrete
  • Five-point carbide tips (1-3/4" OD x 5/8" ID)
  • Longer life than steel tooth cutters, average of 6000 to 8000 square feet
  • Maximum cutting rate is 1/8" per pass
Six Tooth Carbide Tip Star
  • Used for grinding, leveling, grooving, cleaning, and preparing concrete
  • Six-point carbide tips (1-3/4" OD x 5/8" ID)
  • Exceptional life, average of 8000 to 10000 square feet
  • Maximum cutting rate is 1/8" per pass
18 Tooth Steel Sharp Tooth Cutter
  • Used for general cleaning of concrete or asphalt including removal of paint, epoxy, urethane, adhesive, and heavy dirt, grease and oil deposits
  • 18 tooth hardened steel, (2" OD x 5/8" ID)
  • Average life of 500 to 800 square feet
  • Maximum cutting rate is 1/16" per pass
12 Tooth Steel Blunt Tooth Cutter
  • Used for paint and oil removal, traffic and shop floor safety-line removal, cleaning and concrete preparation
  • 12 tooth, hardened steel (2" OD x 9/16" ID)
  • Average life of 500 to 800 square feet
  • Maximum cutting rate is 1/16" per pass
Warning IconWarning: This product can expose you to chemicals including nickel and crystalline silica, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov