Customer Service:

(800) 421-5830

MK Facebook Link MK Twitter Link MK Instagram Link MK Youtube Link

MK Diamond Products are available through GSA Advantage!

Product specifications subject
to change without notice.

© 2020 MK Diamond Products, Inc. 
MK-2000 Series Core Saws

These precision built saws are designed for rapid and accurate sawing of exploratory core specimens. The specially designed 14" segmented diamond blade allows cutting of hard or dense rock samples and engineered materials. The integral core holder provides for rapid and safe cutting of cylindrical core samples. Adjustable height cutting head accommodates specimen sizes between 1" and 5" in diameter.

  • Stay level blade guard gives 180º coverage at all times
  • Blade shaft is built with sealed, permanently lubricated, heavy-duty bearings
  • Cast-aluminum structural components & jig-welded steel frame assembly
  • Convenient ON/OFF switch for operator safety
  • Recoil spring return cutting head
  • Cast aluminum blade guard with stainless steel water tubes that will not bend or rust
  • Adjustable water supply for maximum blade protection
  • Thermally protected 2 hp motor on electric saws
  • Submersible electric water pump
  • Made in the USA
  • 230V/50 Hz motor available on request
  • One-year limited warranty
Model MK-2002E MK-2005G
Part # 158751 166423
Motor 2hp Honda GX160
Voltage 230V
Motor RPM 3,450 3,600
Blade RPM 3,100 2,550
Blade Capacity 14" (350mm) 14" (350mm)
Arbor 1" (25mm) 1" (25mm)
Table Travel 29" 29"
Max Core Sample Length 12" 12"
Max. Core Sample Diameter 5" 5"
Min. Core Sample Diameter 1" 1"
Weight 172 lbs. 191 lbs.
LxWxH 34" x 25" x 32" 38" x 24" x 39"
LxWxH (mm) 940 x 584 x 737 965 x 610 x 991

Warning IconWarning: This equipment contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. These chemicals are contained in various components. fluids and paint including but not limited to fuel, oil, electric motors and batteries. In addition, gasoline/diesel powered equipment emits engine exhaust and fumes, and when serviced, cleaned or maintained generate used oil, waste fluids, fumes, grease, grime and particulates from the component wear and silica dust which contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
Click on thumbnails for enlarged images.
Core Clamp with 4" Core Insert Stay level blade guard Fork lift brackets
Accessories Included with MK-2000 Series Core Saw
Core Sample Holder Core Sample Holder

MK-62Q Blade 14" MK-62Q Wet Cutting Diamond Blade

Electric Water Pump Electric Water Pump (Centrifugal Water Pumps on Gas Saws)

Pro Saw Stand Pro Saw Stand