MK-1590 Rail Saw
MK-1590 Features:
- 130" length of cut*
- 15 Amp direct-drive motor
- Tilting head for precise 45º miter cuts up to 2-1/4" deep
- Adjustable height plunge-cutting head
- Light weight precision extruded aluminum rails provide accurate and even tracking during all cutting operations
- Rails have replaceable slip-on pads to protect material surface from scratches
- Precision, maintenance-free bearings provide smooth and reliable tracking of the cutting head
- Replaceable dust filter
- Valve controlled water feed
- 72" 120V standard U-ground electrical cord and GFCI
- Saw comes complete with two sets of 72" rail, rail connector plate, 12" blade capacity cutting head, two hold-down clamps and standard garden hose water connector
- Additional rails for extending cutting capacity sold separately
- One-year limited warranty
* Saw shown with 72" rail. Second rail set included with saw extends cutting length to 130"
| Motor |
Electric |
| Power |
1-3/4 HP, 120V |
| Amps |
15 |
| Blade RPM |
3,500 |
| Blade Capacity |
12" (254mm) |
| Arbor |
1" (25.4mm) |
| Length of Cut |
130" (3,202mm) |
| Depth of Cut |
2-7/8" (73mm) |
| Depth of Cut at 45º |
2-1/4" (57mm) |
| Weight |
95 lbs. (43kgs.) |
| LxWxH (in) |
144" x 16" x 13" |
| LxWxH (mm) |
3,658 x 406 x 330 |
| MK-1590 Part # |
166105 |
| MK-1590 w/ Vacuum Clamps |
166398 |
|
|
| Accessories Included with MK-1590 |
| Cutting head |
| Two sets 72'' rails |
| Four parallel spreader brackets |
| Rail connector plate |
| Two hold down clamps |
| Recommended Blades |
| Granite |
MK-62G |
| Marble |
MK-62M |
| Tile & Porcelain |
MK-415 |
| Optional Accessories |
| Diamond Blades |
| Vacuum clamp system (Part # 166200) |
|
|
