MK-5000 Gas Series Block Saws
MK-5000 Series Features:
- Precision screw feed mechanism allows the cutting head to be easily raised or lowered to the precise cutting depth required
- Self-leveling blade guard provides optimum blade coverage for operator safety
- Open-back design allows for material up to 20" long to be cut
- Conveyor cart built from heavy-duty cast aluminum
- Adjustable water supply for maximum blade protection
- Built-in tie-downs for safer saw transport
- Ergonomically designed handle for reduced operator fatigue
- Engine attachment is via four vibration isolation mounts
- Belt driven, self-priming centrifugal water pumps can be disengaged for dry cutting
- Heavy-duty built-in forklift brackets allow lift to approach from the front or either side of the saw
- One-year limited warranty
| Model |
MK-5009G |
MK-5009G |
| Engine |
Honda GX270 Cyclone |
Kohler CH395 |
| Weight |
498 lbs. (225kg) |
498 lbs. (225kg) |
| Part # (14" Blade Guard) |
158935-14 |
• |
| Part # (20" Blade Guard) |
158935 |
168805 |
| Part # (24" Blade Guard) |
158935-24 |
168805-24 |
| Model |
MK-5010G |
MK-5013G |
| Engine |
Vanguard 19H200 |
Honda GX390 Cyclone |
| Weight |
513 lbs. (233kg) |
513 lbs. (233kg) |
| Part # (20" Blade Guard) |
169338 |
158936 |
| Part # (24" Blade Guard) |
169338-24 |
158936-24 |
| General Specifications |
| Arbor Size |
1" |
| Motor RPM |
3,600 |
| Shaft RPM (14" Blade) |
2,700 |
| Shaft RPM (20" Blade) |
1,851 |
| Shaft RPM (24" Blade) |
1,653 |
| L x W x H |
57" x 26" x 72" |
| L x W x H (mm) |
1,524 x 660 x 1,826 |
| Depth of Cut with 20" Blade |
8" |
| Depth of Cut with 24" Blade |
10" |
| Length of Cut |
20" |
| Shipping Method |
Truck |
|
|
| Accessories Included with MK-5000 Gas Saws |
| Centrifugal Water Pump (gas saws) |
| Rip Guide |
|
|
|
|
| Optional Accessories for MK-5000 Saws |
For information on dry cutting vacuum
systems
for
MK-5000
series
saws please visit
the IQ Power Tools site or
download a PDF
version
of their
product
sheet by clicking here. |
|
 |
| Stay level blade guard gives 180º coverage at all times. |
|
|
 |
| Open-back design allows 8" high block to be cut in a single pass. |
|
|
 |
| The MK-5000 conveyor cart is built from heavy-duty cast aluminum. A skid-resistant rubber top is permanently bonded to the table top for wear resistance. Water-flow control vents channel water during cutting operations to the water pan. Nylon conveyor cart wheels have permanently sealed bearings. |
|
|
 |
| Gas saw cutting heads are designed to keep the rotation of the motor within the manufacturer's requirement of degrees of motion. |
|
|
 |
| Heavy-duty built-in forklift brackets allow lift to approach from front, back, or either side. |
|
|
 |
| MK-5000 series saw shown with the optional JackVac dry cutting vacuum system (click for details). |
|
Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. MK Diamond Products makes no claim, representation or warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy or the engine power rating. Users are advised to consult the engine manufacturer’s owners manual and website for specific information regarding the engine power rating.
