MK-5000 Electric Series Block Saws

MK-5000 Series Wet Cutting Masonry Saw
MK-5005S [+]    MK-5007T [+]

MK-5000 Electric Series Features:

  • Precision screw feed mechanism allows the cutting head to be easily raised or lowered to the precise cutting depth required
  • Self-leveling blade guard provides optimum blade coverage for operator safety
  • Open-back design allows for material up to 20" long to be cut
  • Conveyor cart built from heavy-duty cast aluminum
  • 3 phase saws are equipped with GE NEMA 1 starters in NEMA 12 enclosure
  • Adjustable water supply for maximum blade protection
  • Built-in tie-downs for safer saw transport
  • Ergonomically designed handle for reduced operator fatigue
  • Heavy-duty built-in forklift brackets allow lift to approach from the front or either side of the saw
  • One-year limited warranty
 Model  MK-5005S MK-5005T MK-5005T
Motor Baldor Baldor Baldor
Horse Power 5 HP 5 HP 5 HP
Voltage 230V 1 Phase 230V 3-Phase 480V 3-Phase 
Weight 445 lbs. (202kg) 451 lbs. (205kg) 451 lbs. (205kg)
14" Blade Guard 160634-14 160636-14 160637-14
20" Blade Guard 160634 160636 160637
 Model MK-5007T MK-5007T MK-5009T
Motor Baldor Baldor Baldor
Horse Power 7.5 HP 7.5 HP 9 HP
Voltage 230V 3-Phase 480V 3-Phase  230V 3-Phase
Weight 485 lbs. (220kg) 485 lbs. (220kg) 503 lbs. (228kg)
14" Blade Guard 160641-14 160642-14 160646-14
20" Blade Guard 160641 160642 160646
24" Blade Guard 160641-24 160642-24 160646-24
 Model MK-5009T MK-5010S MK-5010T
Motor Baldor Baldor Baldor
Horse Power 9 HP 10 HP 10 HP
Voltage 480V 3-Phase 230V 1 Phase 230V 3-Phase 
Weight 503 lbs. (228kg) 503 lbs. (228kg) 503 lbs. (228kg)
14" Blade Guard 160647-14 • •
20" Blade Guard 160647 • •
24" Blade Guard 160647-24 169328 169330
Model MK-5010T MK-5010T  
Motor Baldor Baldor  
Horse Power 10 HP 10 HP  
Voltage 480V 3-Phase  480V 3-Phase
with Inverter		  
Weight 503 lbs. (228kg) 503 lbs. (228kg)  
20" Blade Guard 169331 169337  
Click here for a list of MK-5000 Series saws with 50 hz motors.
General Specifications
Arbor Size 1"
Motor RPM 1,725
Shaft RPM (14" Blade) 2,700
Shaft RPM (20" Blade) 1,925
Shaft RPM (24" Blade) 1,540
L x W x H 53" x 26" x 63"
L x W x H (mm) 1,346 x 660 x 1,600
Depth of Cut with 14" Blade 5"
Depth of Cut with 20" Blade 8"
Depth of Cut with 24" Blade 10"
Length of Cut 20"
Shipping Method Truck
Motors available in other electrical configurations.

Accessories Included with MK-5000 Saws
Electric Water Pump
Rip Guide

Recomended Blades
Brick MK-10
Hard Brick MK-10PSL
Brick & Block MK-30
Concrete Block MK-50
Hard Material (Silent Core) MK-925DSLX

Optional Accessories for MK-5000 Saws
For information on dry cutting vacuum systems for
MK-5000 series saws please visit the IQ Power Tools
site or download a PDF version of their product sheet
by clicking here.
MK-5000 Series Blade Guard
Stay level blade guard gives 180º coverage at all times.

MK-5000 Series Open Back
Open-back design allows 8" high block to be cut in a single pass.

MK-5000 Electric Series Three Phase Control Box
All 3 phase saws are equipped with GE NEMA size 1 starters with NEMA 12 enclosure. The power cord is a minimum length of 6 feet and comes ready for panel wiring. Additional power cord length is available upon request.

MK-5000 Series Conveyor Cart
The MK-5000 conveyor cart is built from heavy-duty cast aluminum. A skid-resistant rubber top is permanently bonded to the table top for wear resistance. Water-flow control vents channel water during cutting operations to the water pan. Nylon conveyor cart wheels have permanently sealed bearings.

MK-5000 Gas Series Belts & Shock Mounts
Heavy-duty built-in forklift brackets allow lift to approach from front, back, or either side.

MK-5000 series saw shown with the optional JackVac dry cutting vacuum system (click for details).