MK-2000 Series Brick & Block Saws
MK-2000 Series Features:
- 14" blade capability and 5" depth of cut
- Convenient ON/OFF switch for operator safety
- Cast-aluminum structural components & jig-welded steel frame assembly
- Stay-level blade guard provides maximum depth of cut at any head height
- Drop down blade shaft is built with sealed, permanently lubricated, heavy-duty bearings
- Open-back design allows for material up to 16" long to be cut
- Recoil spring return cutting head for easy plunge cutting
- Cast aluminum blade guard with stainless steel water tubes that will not bend or rust
- Adjustable water supply for maximum blade protection
- Fork lift brackets for ease of transportation
- Includes rip guide and 14" diamond blade
- One-year limited warranty
| Model |
MK-2001SV |
MK-2002 |
| Motor |
Baldor (Electric) |
Baldor (Electric) |
| Power |
1-1/2 HP 115V |
2 HP 115/230V |
| Amps |
14.4 |
16.8/8.4 |
| Motor RPM |
1,750 |
3,450 |
| Blade RPM |
2,540 |
3,100 |
| L x W x H |
34" x 25" x 32" |
34" x 25" x 32" |
| L x W x H (mm) |
864 x 635 x 813 |
864 x 635 x 813 |
| Weight |
157 lbs. (71.2 kg) |
170 lbs. (77.1 kg) |
| Part # |
161195 |
150598 |
| Model |
MK-2005H |
MK-2006R |
| Engine |
Honda (Gas) |
Subaru (Gas) |
| Power |
GX160 |
EX170 |
| Motor RPM |
3,600 |
3,600 |
| Blade RPM |
2,550 |
2,550 |
| L x W x H |
41" x 25" x 42" |
41" x 25" x 42" |
| L x W x H (mm) |
1041 x 635 x 1067 |
1041 x 635 x 1067 |
| Weight |
187 lbs. (84.8 kg) |
187 lbs. (84.8 kg) |
| Part # |
155961 |
159885 |
| Model |
MK-2006V |
MK-2007K |
| Engine |
Vanguard (Gas) |
Kohler (Gas) |
| Power |
13H3 |
CH270 |
| Motor RPM |
3,600 |
3,600 |
| Blade RPM |
2,550 |
2,550 |
| L x W x H |
41" x 25" x 42" |
41" x 25" x 42" |
| L x W x H (mm) |
1041 x 635 x 1067 |
1041 x 635 x 1067 |
| Weight |
187 lbs. (84.8 kg) |
187 lbs. (84.8 kg) |
| Part # |
169947 |
167999 |
| General Specifications |
| Blade Capacity |
14" (356mm) |
| Arbor Size |
1" (25mm) |
| Length of Cut |
16" (406mm) |
| Depth of Cut |
5" (127mm) |
| Shipping Method |
Truck |
|
|
| Included Accessories |
| 14" Dry Cutting Diamond Blade |
| Electric Water Pump (Electric Saws) |
| Centrifugal Water Pump (Gas Saws) |
| Rip Guide |
|
|
|
 |
| Stay level blade guard gives 180º coverage at all times. |
|
 |
| Open-back design allows for material up to 16" long to be cut. |
Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. MK Diamond Products makes no claim, representation or warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy or the engine power rating. Users are advised to consult the engine manufacturer’s owners manual and website for specific information regarding the engine power rating.
