|
|
|
|
|
| MK-4000 Electric Series |
Self-Propelled Concrete Saws |
|
|
|
|
|
| The MK-4000 Electric Saw provides a solution for those environments and situations where electric power is the right choice, whether for indoor use or simply operator preference. The saw utilizes a three-phase, 30 Hp, Baldor electric motor in 230V or 460V to match the user’s need. The saw features the same hydraulic raise/lower system, self-propelled transmission and control set as other MK-4000s. The saw has an on-board battery to provide 12VDC power for raise/lower function when the saw is not plugged in, and has a transformer/battery charger to recharge the system automatically anytime the saw is connected to power. The saw can also be plugged into 120VAC to recharge or maintain the battery when the saw is not in use. An ammeter is provided to help monitor load when cutting. |
MK-4000 Pro Series Features:
- Totally enclosed and sealed blade shaft with continuous oil bath lubrication system
- Control set provides proportional blade raising/lowering and travel speed with one hand operation
- Quick release, auto-latching bayonet mount blade guard
- Blade guard uses "ride on the blade" water tubes for superior water delivery and blade cooling
- Eaton model 6 Hydrostatic transmission coupled to an MK differentiating trans-axle
- Saw designed for left or right side mounting of blade and blade guard
- Differential lock (for cutting on slippery surfaces) and free wheel/engage controls (to allow the saw to be pushed manually)
- Three-position adjustable solid steel handlebars
- Rigid frame front pointer with high visibility guide wheel for accurate tracking
- 7 3VX V-belt drive from engine to blade shaft
- Travel Speed: 0-220 FPM Forward, 0-100 FPM Reverse
|
| Model |
MK-4024B |
MK-4024B |
| Motor |
Baldor (Electric) |
Baldor (Electric) |
| Power |
30 Hp 230V 3 Phase |
30 Hp 460V 3Phase |
| Blade Capacity |
24" |
24" |
| Arbor |
1" with 3/8" Drive Pin |
1" with 3/8" Drive Pin |
| Blade RPM |
2,040 |
2,040 |
| Depth of Cut |
9-1/2" |
9-1/2" |
| Weight |
1250 lbs. (567 kg) |
1250 lbs. (567 kg) |
| Part # |
167438-24 |
167439-24 |
| Model |
MK-4030B |
MK-4030B |
| Motor |
Baldor (Electric) |
Baldor (Electric) |
| Power |
30 Hp 230V 3 Phase |
30 Hp 230V 3 Phase |
| Blade Capacity |
30" |
30" |
| Arbor |
1" with 3/8" Drive Pin |
1" with 3/8" Drive Pin |
| Blade RPM |
1,770 |
1,770 |
| Depth of Cut |
12-1/2" |
12-1/2" |
| Weight |
1250 lbs. (567 kg) |
1250 lbs. (567 kg) |
| Part # |
167438-30 |
167439-30 |
|
|
| General Specifications |
| Switch |
IP 65 IEC across the line starter |
| Arbor |
1" with 3/8" Drive Pin |
| Travel Speed |
0-220 FPM Forward, 0-100 FPM Reverse |
| L x W x H |
64" x 35" x 47" |
|
|
|
|
|
|
|
© 2010 MK Diamond Products, Inc. 1315 Storm Pkwy Torrance, CA 90501
Customer Service: (800) 421-5830 CustomerService@mkdiamond.com
Product specifications are subject to change without notice.
|
|
|
