MK-4000 Series Diesel Saws
|
MK-4000 Series Features:
- Totally enclosed and sealed blade shaft with continuous oil bath lubrication system
- Control set provides proportional blade raising/lowering and travel speed with one hand operation
- Quick release, auto-latching bayonet mount blade guard
- Blade guard uses "ride on the blade" water tubes for superior water delivery and blade cooling
- Eaton model 6 Hydrostatic transmission coupled to an MK differentiating trans-axle
- Saw designed for left or right side mounting of blade and blade guard
- Differential lock (for cutting on slippery surfaces) and free wheel/engage controls (to allow the saw to be pushed manually)
- Three-position adjustable solid steel handlebars
- Rigid frame front pointer with high visibility guide wheel for accurate tracking
- 7 rib powerband drive from engine to blade shaft
- Travel Speed: 0-220 FPM Forward, 0-100 FPM Reverse
- Fuel Capacity: 5.75 gallons
The 44Hp Kubota V1505-T-E3B is a 4 cylinder in-line, turbocharged, liquid-cooled diesel engine. It is fuel efficient, altitude compensating, has low emissions and meets all EPA and CARB requirements. The engine is 1498cc in displacement and features Kubota’s Three Vortec Combustion system, which produces an ideal air/fuel mixture that provides increased combustion efficiency and cleaner exhaust.
| Model | MK-4020KB | MK-4026KB | MK-4030KB | MK-4036KB |
| Engine | Kubota Diesel V1505-T-E3B |
Kubota Diesel V1505-T-E3B |
Kubota Diesel V1505-T-E3B |
Kubota Diesel V1505-T-E3B |
| Horse Power* | 44 | 44 | 44 | 44 |
| Blade Capacity | 20" (508mm) | 26" (660mm) | 30" (762mm) | 36" (914mm) |
| Blade RPM | 2,300 | 2,000 | 1,750 | 1,450 |
| Depth of Cut | 7-1/2" (191 mm) | 10-1/2" (267 mm) | 12-1/2" (318mm) | 15" (381mm) |
| Weight | 1,080 lbs. (490 kg) | 1,080 lbs. (490 kg) | 1,080 lbs. (490 kg) | 1,080 lbs. (490 kg) |
| Part # | 167420-20 | 167420-26 | 167420-30 | 167420-36 |
|
||||||||||||||
|
||||||||||||||
|
||||||||||||||
Instruments are positioned for better visibility, quick access and
ease of operation. Control set provides proportional blade raising/
lowering and travel speed with one hand operation.
Removable rear panel for easy accessibility for service and maintenance.
Removable side panel provides quick access to drive belts.
Built-in lifting bale
The MK-4000 Professional Series is available with a Hyundai
48 Hp gas engine or Kubota 44 Hp diesel engines. The saws
feature a Donaldson air filter that protects the engine and
delivers long filter life.
Blade guard uses"ride on the blade" water tubes for superior water
delivery and blade cooling.
Quick, release, auto-latching
bayonet mount blade guard.
Superb balance that minimizes user
fatigue while increasing maneuverability
and providing straight line
tracking during cutting.
Provides positive drive to both
rear wheels for maximum traction
when cutting on slippery surfaces
and free/engage controls to allow
the saw to be pushed manually.
Designed for both front and rear pivoting allowing for ease of
movement and control. Three-position adjustable solid steel
handlebars are ergonomically designed; they adjust to
comfortably accommodate the operator.
Axle is designed for smooth
transition of raise and lower, in and
out of cuts.
Removable blade shaft stub for easy
maintenance. Totally enclosed and
sealed blade shaft with continuous
oil bath lubrication system.
Eaton model 6 hydrostatic
transmission coupled to an MK
differentiating trans-axle provides
continuous variable forward/
reverse travel and cutting motion.
Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. MK Diamond Products makes no claim, representation or warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy or the engine power rating. Users are advised to consult the engine manufacturer’s owners manual and website for specific information regarding the engine power rating.
