| MK-4000 Series Features: |
| • |
Ergonomic joystick allows one-handed control of traverse and cutting depth |
| • |
Quick release, auto latching bayonet mount blade guard |
| • |
Enclosed blade shaft with oil bath lubrication system |
| • |
Three position adjustable solid steel handle bars |
| • |
Blade guard has garden hose style connector for quick disconnecting |
| • |
Telescoping front pointer |
| • |
Instrumentation includes engine tach, fuel level and hour meter |
| • |
Indicator lights for oil pressure, cylinder head temperature, parking brake, headlight and low battery voltage |
| • |
Blade protection system shuts down engine during wet cutting if water pressure drop is detected |
| • |
Depth of cut indicator |
| • |
Separate valve controls for blade guard and wash down spray head |
| • |
Saw designed for left or right side mounting of blade and blade guard |
| • |
Blade guard water distribution system designed for optimal blade cooling |
| • |
Lifting bail |
| • |
Manually operated disc parking brake |
| • |
Positive depth stop |
| • |
Removable rear and side panels for easy service |
| • |
7 3VX V-belt drive from engine to blade shaft |
| • |
Electrohydraulic pump raises blade, user adjustable valve for setting blade lowering rate |
| • |
Wide front wheel base increases stability and allows ramp loading/unloading |
| • |
Eaton model 6 Hydrostatic transmission coupled to an MK trans-axle |
| • |
Differential Lock for cutting on slippery surfaces |
| • |
Transmission can be disengaged from axle to allow saw to be pushed manually |
| • |
Travel speed 0-220 FPM forward, 0-100 FPM reverse |
| • |
Neutral start switch to prevent starting with transmission in gear |
