MK-20 Series Self-Propelled Concrete Saws
MK-20 Series Features:
- One-piece box construction chassis made from 3/16" hot-rolled steel will not flex during operation
- Powder-coated chassis resists peeling & corrosion
- Cast-aluminum hinged blade guard
- Stainless steel water distribution system supplies water to both sides of blade
- Blade guard mounts on both left- or right-hand side of saw and cuts within 2" of wall or curb
- Heavy-duty blade shaft supported by two 1-3/16", self-aligning pillow block bearings
- Depth control assembly engineered for smooth, controlled blade insertion
- Built-in tach/hour meter
- Depth feed gauge indicator
- Heavy-duty hydro static transmission with variable speed drive
- Durable 8"x 2 1/4" non-slip rubber wheels with maintenance-free hubs & roller bearing
- Forward travel speed: 0-80'/minute
| Model |
MK-2013HE |
MK-2013HSP |
MK-2013SE |
MK-2013SSP |
| Engine |
Honda GX390 |
Honda GX390 |
Subaru EH41 |
Subaru EH41 |
| Fuel |
Gas |
Gas |
Gas |
Gas |
| Starter |
Electric |
Pull |
Electric |
Pull |
| Fuel Capacity |
1.6 gallons |
1.6 gallons |
1.6 gallons |
1.6 gallons |
| Blade Capacity |
18" |
18" |
18" |
18" |
| Blade RPM |
3,400 |
3,400 |
3,400 |
3,400 |
| Depth of Cut |
6-5/8" (167mm) |
6-5/8" (167mm) |
6-5/8" (167mm) |
6-5/8" (167mm) |
| Weight |
290 lbs. |
310 lbs. |
290 lbs. |
310 lbs. |
| Part # |
155714 |
156499 |
155714-S |
156499-S |
| Model |
MK-2013VSP |
MK-2014K |
MK-2020HSP |
MK-2024HSP |
| Engine |
Vanguard V-Twin |
Kohler CH440 |
Honda GX630 |
Honda GX690 |
| Fuel |
Gas |
Gas |
Gas |
Gas |
| Starter |
Pull |
Pull |
Electric |
Electric |
| Fuel Capacity |
1.6 gallons |
1.6 gallons |
1.6 gallons |
1.6 gallons |
| Blade Capacity |
18" |
18" |
20" |
20" |
| Blade RPM |
3,400 |
3,400 |
2,863 |
2,850 |
| Depth of Cut |
6-5/8" (167mm) |
6-5/8" (167mm) |
7-5/8" (194mm) |
7-5/8" (194mm) |
| Weight |
310 lbs. |
310 lbs. |
392 lbs. |
398 lbs. |
| Part # |
169949 |
168798 |
156498 |
158777 |
| Model |
MK-2022SSP |
MK-2025SSP |
|
|
| Engine |
Subaru EH650 |
Subaru EH720 |
|
|
| Fuel |
Gas |
Propane |
|
|
| Starter |
Electric |
Electric |
|
|
| Fuel Capacity |
1.6 gallons |
5 gallons |
|
|
| Blade Capacity |
20" |
20" |
|
|
| Blade RPM |
2,850 |
2,863 |
|
|
| Depth of Cut |
7-5/8" (194mm) |
7-5/8" (194mm) |
|
|
| Weight |
398 lbs. |
417 lbs. |
|
|
| Part # |
168952 |
168953 |
|
|
|
* Meets U.S EPA EVAP Standards Family BMKDPNHEQ20S |
| General Specifications |
| Arbor Size |
1" (25mm) |
| LxWxH (inches) |
46" x 26" x 37" |
| LxWxH (mm) |
1,168 x 660 x 940 |
|
|
| Accessories Included with MK-20 Series Saws |
| Lifting Bail |
|
|
|
|
|
|
| MK-20 Series hinged blade guard. |
|
 |
| Blade guard mounts on either left- or right-hand side of saw and cuts within 1" of wall or curb. |
|
 |
| MK-20 Series control panel. |
|
 |
| MK-20 Series drivetrain. |
Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. MK Diamond Products makes no claim, representation or warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy or the engine power rating. Users are advised to consult the engine manufacturer’s owners manual and website for specific information regarding the engine power rating.
