MK-1600 Series Walk-Behind Concrete Saws
MK-1600 Series Features:
- One-piece box construction chassis made from 3/16" hot-rolled steel will not flex during operation
- Powder-coated chassis resists peeling & corrosion
- Cast-aluminum hinged blade guard
- Stainless steel water distribution system supplies water to both sides of blade
- Blade guard mounts on both left- or right-hand side of saw and cuts within 2" of wall or curb
- 1" blade shaft supported by two heavy-duty, self-aligning pillow block bearings
- Depth control assembly engineered for smooth, controlled blade insertion
- Durable 8" x 2-1/4" non-slip rubber wheels with maintenance-free hubs & roller bearings
- Positive-locking depth control mechanism
- Premium Series saws include built-in depth gauge, tach/hour meter, and lifting bail
- One-year limited warranty
| Model |
MK-1614K Standard |
MK-1614K Premium |
MK-1613S Standard |
| Engine |
Kohler CH440 |
Kohler CH440 |
Subaru EH41 |
| Blade RPM |
2,700 |
2,700 |
2,700 |
| Weight |
223 lbs. (101 kgs.) |
233 lbs. (106 kg) |
223 lbs. (101 kgs.) |
| Part # |
157864-K |
168930 |
160832-S |
| Model |
MK-1613S Premium |
MK-1613V Standard |
MK-1613H Standard |
| Engine |
Subaru EH41 |
Vanguard V-Twin |
Honda GX390 |
| Blade RPM |
2,700 |
2,700 |
2,700 |
| Weight |
233 lbs. (106 kg) |
233 lbs. (106 kg) |
223 lbs. (101 kg) |
| Part # |
160772-S |
169948 |
160832 |
| Model |
MK-1613H Premium |
MK-1609H Standard |
MK-1605B Standard |
| Engine/Motor |
Honda GX390 |
Honda GX240 |
Baldor 5 Hp 240V |
| Blade RPM |
2,700 |
2,700 |
2,400 |
| Weight |
233 lbs. (106 kg) |
210 lbs. (95 kgs.) |
275 lbs. (125 kgs.) |
| Part # |
160772 |
157867 |
168099 |
| Model |
MK-1610B Premium |
MK-1610B Premium |
|
| Motor |
Baldor 10 Hp 230V 3 Phase |
Baldor 10 Hp 460V 3 Phase |
|
| Blade RPM |
2,400 |
2,400 |
|
| Weight |
275 lbs. (125 kgs.) |
275 lbs. (125 kgs.) |
|
| Part # |
167426 |
167427 |
|
| General Specifications |
| Arbor Size |
1" (25mm) |
| Blade Capacity |
18" (457mm) |
| Depth of Cut |
6-5/8" (168mm) |
| LxWxH (inches) |
42" x 25" x 39" |
| LxWxH (mm) |
1,067 x 635 x 991 |
|
|
| Accessories Included with MK-1600 Premium Saws |
| Built-in Depth Gauge |
| Built-in Tach/Hour Meter |
| Lifting bail |
|
|
| Accessories Included with MK-1610B |
| Lifting bail |
|
|
|
|
|
|
| Cast-aluminum blade guard with stainless steel water distribution system supplies water to both sides of blade. |
|
|
 |
| Blade guard mounts on either left- or right-hand side of saw and allows cutting within 2" of wall or curb. |
|
|
 |
| 1-1/4" blade shaft supported by two heavy-duty, self-aligning pillow block bearings. |
|
|
 |
|
|
 |
| MK-1600 series optional water tank. |
|
Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. MK Diamond Products makes no claim, representation or warranty as to the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatsoever with respect to the accuracy or the engine power rating. Users are advised to consult the engine manufacturer’s owners manual and website for specific information regarding the engine power rating.